A wheeled excavator spends all day under changing forces: slewing with a full bucket, lateral loading while digging, driving over rubble and sharp material. The tyre has to absorb that with grip, stability and above all resistance to cuts and punctures. Every unexpected flat means downtime on site, and downtime costs money.
HBI Tyres & Wheels supplies excavator tyres that combine grip, stability and puncture resistance, from the Delcora house brand to Bandenmarkt heavy duty. Steel belted constructions, strong sidewalls and self-cleaning patterns keep your wheeled excavator available, even on the toughest ground.
HBI supplies excavator tyres to earthmoving contractors, rental companies and builders across north-west Europe. We know the machines and the conditions they work in, and deliberately choose constructions that can handle the harshest sites. With Delcora and Bandenmarkt we offer a suitable, puncture resistant solution for virtually every wheeled excavator.
Excavator tyres that keep working where it gets tough.
Digging puts large lateral forces on the tyres. A wide footprint and a sturdy construction keep the machine stable, even with a full bucket at reach.
That stability translates into more accurate work and less sway while slewing.
On site there is rubble, steel and sharp material. Our excavator tyres have a puncture resistant tread and a strong sidewall, so you stand still less often because of a flat.
Steel belted constructions increase resistance to penetration and extend service life.
From mud to tarmac, an excavator constantly changes surface. Self-cleaning patterns hold grip in clay yet still roll calmly on the road between two jobs.
That keeps the machine agile and safe, whatever the terrain.
An excavator with attachments and a full bucket demands a high PR rating and ample load capacity. Our sizes are matched to heavy machines, so you can work at full capacity without concern.
Available in several sizes, from stock, so you can get back to work quickly.
Tread and sidewall that withstand cuts, rubble and sharp material.
Wide footprint and strong construction for accurate and safe digging.
Common excavator sizes from stock, with advice on PR and fitment.
For a wheeled excavator the choice begins with the PR rating and load capacity. A machine with attachments and a full bucket at reach demands a high ply rating so the tyre absorbs the lateral and vertical forces without deforming. Choose load capacity generously, because peak loads rise sharply during slewing in particular.
Puncture resistance is often decisive on site. Rubble, steel and sharp material cause cuts and penetration. A tyre with a strong, cut resistant tread and a steel belted construction withstands this better and limits downtime. Every flat avoided is half a day gained in the planning.
The pattern determines the balance between grip and road behaviour. Self-cleaning patterns hold grip in mud and clay, while a calmer tread rides more comfortably on the road between two jobs. Because an excavator often changes surface, a pattern that combines both is usually the smartest choice.
Finally, consider whether you take the tyre on its own or as a complete tyre and wheel set. A ready-made wheel set to specification saves fitting time and prevents fit problems. Our specialists will help you with size, PR and fitment so your excavator can get back to work quickly and safely.
Maintenance extends service life here too. Keep the tyre pressure up, because low pressure causes heat build-up and flex damage in the sidewall. Inspect the tyres after a heavy job for cuts and remove embedded steel or stone chippings before they penetrate further. That stops small damage growing into a flat at an inconvenient moment.
Also treat the rim and the air pressure as one unit. A damaged or bent rim puts permanent stress on the tyre bead and leads to slow pressure loss, which easily goes unnoticed on site. Check the condition of rim and valve at every tyre change, because more failures start there than many businesses expect. On request we therefore supply the complete wheel, so tyre and rim are matched.
A selection from the programme. Ask for your size or view the full range.
| Size | Brand | Pattern | Ø diameter | |
|---|---|---|---|---|
| 245/70R19.5 | Bandenmarkt® | Excavator | 858 mm | View → |
| 550/45-22.5 | Delcora® | FLG-1 | 1076 mm | View → |
| 500/45R22.5 | Bandenmarkt® | GSP+ | 1020 mm | View → |
| 445/45R19.5 | Bandenmarkt® | Kargo-Radial | 940 mm | View → |
| 600/55-26.5 | Delcora® | FG | 1333 mm | View → |
| 710/45-26.5 | Delcora® | FG | 1333 mm | View → |
The premium house brand of HBI: flotation, transport and excavator tyres built to our own specification.
Robust tyres for the toughest work in agriculture, earthmoving and industry.
Reliable radial tyres with a strong price-quality ratio.
Industrial and telehandler tyres for intensive use.
HBI Tyres & Wheels supplies excavator tyres throughout the Netherlands, Belgium and Germany, and beyond through a growing dealer and distribution network. The common sizes are held in stock at our warehouse, so you are not left waiting for a delivery in the middle of the season. From our central location we reach north-west Europe quickly; for contractors and hauliers who need a tyre at short notice, that availability is exactly what counts.
Do you work from a specific region or across borders? We will think along about the fastest route and the right specification. Get in touch with our team or find a partner near you through the dealer overview, and we will make sure you are back at work quickly.
Search by size or let our specialists determine the right excavator tyre with the correct PR.
