A telehandler or wheel loader works with heavy point loads: loading, stacking, lifting and manoeuvring in a small space. That demands tyres that hold grip, stay stable under a shifted centre of gravity and withstand intensive use on hard and sharp surfaces. The tyre determines how safely and quickly you can load, and how long the machine keeps working without downtime.
HBI Tyres & Wheels supplies tyres for telehandlers, wheel loaders and shovels that combine grip and stability with a robust construction. From radial patterns for comfort and speed to heavy duty sizes for the toughest work, we find the tyre that matches your machine and your job, from stock and as a complete tyre and wheel set.
HBI supplies telehandler and wheel loader tyres to construction, agriculture and industry. We know the load charts and the demands of intensive lifting and stacking, and therefore advise on the basis of your machine, your load and your surface. With Delcora, Bandenmarkt and EuroGrip we have a suitable, stable tyre for every application.
Telehandler and wheel loader tyres that stay stable under load.
When lifting and stacking, the centre of gravity shifts forward. A sturdy construction and a wide footprint keep the machine stable, even with a full fork at height.
That means safer loading and stacking, with less risk of tipping under a heavy load.
Telehandlers and wheel loaders run long days on hard and sharp surfaces. Strong casings and thick sidewalls limit cuts and punctures, so the machine stays available longer.
Fewer unexpected stops means more work per day and lower cost per hour.
From concrete floor to loose ground, good traction keeps the load under control and stops you spinning. Our patterns offer grip without damaging the surface unnecessarily.
Even wear keeps that grip at the right level for longer.
We supply the tyre on its own or as a complete tyre and wheel set built to the specification of your telehandler or wheel loader. That way fitting is arranged quickly and everything fits first time.
Our specialists advise on size, pattern and load capacity for your machine.
Constructions that stay stable under a shifted centre of gravity and heavy point load.
Strong casings and sidewalls for intensive use on hard surfaces.
Common sizes from stock, with advice on size and fitment.
On a telehandler or wheel loader the centre of gravity shifts forward and upward when lifting. The tyre has to absorb that shift stably, so look for ample load capacity on the front axle and a sturdy construction. Consult the load chart of your machine and choose a tyre that handles the maximum lifting capacity with margin.
The surface and the intensity determine the pattern and the compound. On hard, sharp surfaces such as concrete and rubble, a strong casing with a thick sidewall matters against cuts. If you work a lot on loose ground, traction weighs more heavily. A good tyre combines both without damaging the surface unnecessarily.
Radial or cross-ply is a trade-off between comfort and robustness. Radial tyres ride more comfortably and cooler at higher speeds and longer distances, while cross-ply or extra reinforced tyres are sometimes preferable under very heavy, static use. We will help you make the right choice based on your machine and your work.
Here too we supply the tyre on its own or as a complete tyre and wheel set. A wheel set to specification fits first time and saves fitting time. Give us your current size or machine type and our specialists will determine the tyre that stays stable under load and lasts a long time.
When it comes to maintenance, pay attention to the front axle, which takes the most punishment. Check the pressure regularly and inspect the sidewalls for cuts and impact damage from pallets, stones or rubble. A tyre that holds pressure loads more safely and lasts longer. Our specialists will help you determine the right pressure per application.
A selection from the programme. Ask for your size or view the full range.
| Size | Brand | Pattern | Ø diameter | |
|---|---|---|---|---|
| 500/45R22.5 | Bandenmarkt® | GSP+ | 1020 mm | View → |
| 445/45R19.5 | Bandenmarkt® | Kargo-Radial | 940 mm | View → |
| 600/40-22.5 | EuroGrip | TC-09 | 1100 mm | View → |
| 480/45B17 | Delcora® | YPX-1 | 865 mm | View → |
| 500/45R22.5 | Delcora® | GSP+ | 1022 mm | View → |
| 20.5R25 | Bandenmarkt® | SNOW | 1490 mm | View → |
The premium house brand of HBI: flotation, transport and excavator tyres built to our own specification.
Robust tyres for the toughest work in agriculture, earthmoving and industry.
Industrial and telehandler tyres for intensive use.
Reliable radial tyres with a strong price-quality ratio.
HBI Tyres & Wheels supplies telehandler and wheel loader tyres throughout the Netherlands, Belgium and Germany, and beyond through a growing dealer and distribution network. The common sizes are held in stock at our warehouse, so you are not left waiting for a delivery in the middle of the season. From our central location we reach north-west Europe quickly; for contractors and hauliers who need a tyre at short notice, that availability is exactly what counts.
Do you work from a specific region or across borders? We will think along about the fastest route and the right specification. Get in touch with our team or find a partner near you through the dealer overview, and we will make sure you are back at work quickly.
Search by size or let our specialists determine the right tyre or complete wheel set.
