In industry and recycling, everything revolves around uptime. Machines run non-stop over hard floors, sharp material and rubble, often with heavy loads and short cycles. A tyre that fails brings an entire line or terminal to a halt. That is why industrial use demands tyres that resist cuts and punctures, hold their shape under constant load and keep performing reliably, day and night.
HBI Tyres & Wheels supplies heavy duty industrial tyres for earthmoving, recycling, terminals and internal transport. With the Bandenmarkt heavy duty programme and the Delcora house brand we offer patterns from rib to slick, in sizes matched to the toughest work, from stock and with advice from specialists who know the applications.
HBI supplies industrial tyres to recycling businesses, terminals, earthmoving contractors and manufacturing across the Netherlands, Belgium and Germany. We know the demanding environments these machines run in and deliberately choose heavy duty constructions that keep uptime high. With the Bandenmarkt heavy duty programme and the Delcora house brand we cover virtually every industrial application.
Industrial tyres built for uptime.
Industrial sites are full of sharp material, steel and rubble. Our heavy duty tyres have a strong tread and a thick sidewall that resist cuts and penetration, so you stand still less often.
A strong compound limits cracking and extends service life under heavy use.
Heavy loads and short cycles demand high load capacity and a stable tyre that does not deform. Our industrial sizes are matched to continuous use, so the machine can keep running day and night.
Reliable performance means fewer unexpected stops and a lower cost per hour.
From rib for steering axles to slick for maximum service life on hard floors, the right pattern makes the difference in grip, wear and comfort. We will help you choose the pattern that suits your application.
That way you get the longest service life out of every tyre, matched to your surface.
Waste and recycling are the most demanding environments for a tyre: constant cutting, penetration and heavy loads. Our specially developed heavy duty tyres are built for this, with maximum resistance and ride comfort.
That lowers downtime and cost per hour at your recycling site.
Tread and sidewall that withstand cuts, rubble and sharp material.
High load capacity and stability for continuous use without unexpected stops.
Common industrial sizes from stock, with advice per application.
In industry the choice begins with the balance between grip and service life. A rib pattern gives steering grip and is often used on steering axles, while a slick pattern offers maximum contact and the longest service life on hard, level floors. First decide which of the two matters most for your application.
Cut resistance is crucial on sites with sharp material, steel and rubble. A heavy duty compound and a thick sidewall resist cuts and penetration better and so keep uptime high. For the most demanding environments, such as waste and recycling, there are specially developed tyres with maximum resistance.
Load capacity and heat build-up deserve attention in continuous use. Heavy loads and short cycles make a tyre run hot; a construction that stays stable and dissipates heat well lasts longer. Choose load capacity generously and keep the tyre pressure up to prevent overheating.
Finally, it pays to look at total cost per hour rather than purchase price alone. A slightly more expensive tyre that lasts longer and causes less downtime is often cheaper overall. Our specialists are happy to work this through with you and advise the pattern and load capacity that suit your machines and surface.
Plan tyre replacement as a fixed part of your maintenance rather than as an emergency. Businesses that measure wear regularly and schedule replacement ahead of time avoid the most expensive moment: unplanned downtime in the middle of production. Our specialists will help you set a simple inspection interval that suits your operating hours and your surface.
A selection from the programme. Ask for your size or view the full range.
| Size | Brand | Pattern | Ø diameter | |
|---|---|---|---|---|
| 400/60-15.5 | Delcora® | FLG-1 | 874 mm | View → |
| 49x17 | Bandenmarkt® | Slick | 1230 mm | View → |
| 30x11.5-14.5 | Bandenmarkt® | Flotagrip | 750 mm | View → |
| 40x14.5-19 | Bandenmarkt® | Rib | 1000 mm | View → |
| 44.5x16.5-20 | Bandenmarkt® | Rib | 1085 mm | View → |
| 46x17.0R20 | Bandenmarkt® | Rib | 1100 mm | View → |
Robust tyres for the toughest work in agriculture, earthmoving and industry.
The premium house brand of HBI: flotation, transport and excavator tyres built to our own specification.
Industrial and telehandler tyres for intensive use.
Reliable radial tyres with a strong price-quality ratio.
HBI Tyres & Wheels supplies industrial tyres throughout the Netherlands, Belgium and Germany, and beyond through a growing dealer and distribution network. The common sizes are held in stock at our warehouse, so you are not left waiting for a delivery in the middle of the season. From our central location we reach north-west Europe quickly; for contractors and hauliers who need a tyre at short notice, that availability is exactly what counts.
Do you work from a specific region or across borders? We will think along about the fastest route and the right specification. Get in touch with our team or find a partner near you through the dealer overview, and we will make sure you are back at work quickly.
Search by size or let our specialists determine the right pattern and load capacity for your application.
